The Ultrair 810 Wood-Stove Ecofan replaced the Original 800 Ecofan in October 2012. The new model offers better performance over a wider range of stove surface temperatures, delivering between 15 and 90% more air flow and generates up to 125*CFM.
Available in 2 colours.
Base 121x76mm (4.75 x 3").
Height 223mm (8.75") excluding handle.
Blade diameter 200mm (8")
The Caframo Ecofan 810 UltrAir and 812 AirMax are heat powered fans designed to circulate the warm air created by a wood-stove operating with normal surface temperatures of between 85°C and 345°C. These fans do not use batteries or mains power.
Increased Efficiency: Warm air is circulated directly into the living area rather than having most of the stove's heat rise immediately to the ceiling, thereby increasing the heating efficiency of your stove.
|Heat Distribution with an Ecofan
||Heat Distribution without an Ecofan
Fuel Savings: Testing carried out in collaboration with a leading Canadian university has proven that using an Ecofan® results in fuel savings of up to 18%.
'No Fuss' Operation: The Ecofan® starts automatically and adjusts its speed with the stove temperature. As the stove heats up, the Ecofan® runs faster to move more warm air into the room. As the stove burns down and cools, the Ecofan® automatically shuts off.
Costs Nothing to Operate: Using the heat from the stove, the Ecofan® is the most economical way to effectively circulate warm air. No cables, plugs or batteries are required.
Unique Blade Design - Safe and Efficient: The unique Ecofan® blade is designed to deliver a broad cross section of gentle warm air movement to avoid uncomfortable drafts. The blade is our most efficient blade yet, moving more air at a wider range of stove temperatures. Complies with IEC 60335-2-80 safety standards.
For Optimum Performance of your Ecofan®: Placement of your Ecofan® on your stove top is critical. Be sure to position the Ecofan® on the stove so that cool air will be drawn over the 'cooling fins'. The Ecofan® should not be used directly in front of the stovepipe or at the front of the stove. Place the Ecofan® at the back edge of the stove as shown in the diagram. See the enclosed user manual for further tips on positioning the Ecofan® on your stove.
Make the Right Choice of Wood-Stove Ecofan®
*CFM = Cubic Feet (of Air) per Minute
**Time taken to reach 20°C from a cold start of 17°C in a standard test environment.
UltrAir: 76 minutes AirMax: 68 minutes No fan: 110 minutes
*** Temperature required to produce 50 CFM airflow.