Fireplace cleaner removes smoke, soot and tar stains caused by wood, coal and gas fires from brick, stone, concrete, marble and other hard surfaces. It does not normally remove discolouration caused by weathering or natural impurities.
Directions for use:
1. Ensure surface to be cleaned is cool.
2. Remove screens, fixtures etc. and protect floors and carpets
3. Wear protective gloves and clothing
4. Wet the area to be cleaned with plenty of water
5. Pour fireplace cleaner onto a cloth and apply to surface to be cleaned
6. Leave for approximately one minute and then rub vigorously with a damp cloth. Rough textured or pock - marked surfaces will require brushing. An old nail brush is ideal.
7. Rinse area thoroughly with water. Remove surface water with absorbant cloth
8. If stubborn stains remail, repeat treatment.
NOTE: DO NOT USE ON ANY DECORATED OR PAINTED STONE OR SLATE.
Contains
Sodium hydroxide <5%
Corrosive
- Wear suitable gloves, protective clothing and eye/face protection
- Causes burns
- In case of contact with skin, wash thoroughly with water and remove contaminated clothing
- In case of contact with eyes, rinse immediately with plenty of water and seek medical advise
- Do not breath vapour/spray
- Keep out of reach of choldren.
This product comes with The Fireside Shop no quibble guarantee, if for any reason you are not happy with your purchase you are welcome to return it, (terms and conditions apply) if you have any questions regarding this product or require any further information please contact the shop.